Saeco HD8924 Bedienungsanleitung Seite 10

PRIMING
HEATING UP
RINSING
ACTIVATE
AQUACLEAN FILTER?
2 MIN
10The display shows the circuit priming icon to indicate that you have to prime
the circuit.
11Place a container under the coffee dispensing spout and the steam tube.
Press the OK button to start the water circuit priming cycle. The machine
starts dispensing hot water.
12The display shows the priming icon. The progress bar shows the progress of
the priming cycle.
13The machine heats up and the display shows the temperature icon.
14Empty the container and place it under the coffee dispensing spout.
15The machine starts rinsing water through the coffee dispensing spout. The
display shows the rinsing icon and a progress bar.
Note: Do not interrupt the rinsing cycle.
16The display asks: Activate AquaClean filter?
Note: If you want to install the AquaClean filter later, press the ESC button and
continue with the manual rinsing cycle. For installation at a later time, see chapter
'AquaClean filter'.
English
9