schwa-medico SPORÉCUP XTR4 Gebrauchsanweisung Seite 41

Positioning of the
electrodes for Dynamic
Stimulation
OPeRaTInG ManUaL SPORÉCUP XTR4
Sideways
Channel 1 Channel 2
Sideways wave: E.g gluteus, stomach muscles
Falling
Channel
Channel
Channel
Channel
Falling/Rising wave: E.g. back, legs
Dynamic stimulation on legs: Place one electrode of each channel
on each leg (size 5x9 cm). All anodes should be on one leg and all
cathodes on the other leg.
Dynamic stimulation on the back: Place one electrode of each channel
on each side of the spinal column (size 5x9 cm). Place all anodes on
one side and all cathodes on the other side.
Important note If you use electrodes with two connectors, always
connect them to the same pole colour of the cables (either both blue
or both red).
Channel 3 Channel 4
Rising
1
2
3
4
41
Channel 4
Channel 3
Channel 2
Channel 1