Leica TL Anleitung Seite 195

Changing network names on the Leica TL
You can create a custom network name for your Leica TL (factory
default setting:
Leica TL Camera Serial Number
the symbol in the WiFi menu on the camera.
DEVICE
► Select
► Select in the submenu
► Select
Device
Note:
The characters " to ", " to
A Z a z
the name. Blanks cannot be used.
Fig. 92a
Fig. 92d
Fig. 92a-d
). To do this, press
", " to ", and " " are available for
0 9 -
Fig. 92b
Fig. 92c
Notes:
• With WiFi access, pictures are only transferred in 2MP resolu-
tion. To access the original data, you should connect the camera
with a USB cable or insert the SD card into an SD card reader.
• Always connect the camera only to secure networks in order to
prevent unauthorized access to your camera and data.
• The WiFi function requires slightly more power. We therefore rec-
ommend that you deactivate the function when it is no longer
required.
• If there is an active USB connection between the camera and a
computer, the WiFi function is disabled on technical grounds.
• There is no access control for the
method. Therefore, make sure that you are working in a secure
WLAN network.
connection
Web Gallery
EN
189