Af Auxiliary Light - Leica TL Anleitung

Notes:
• With the shutter release pressed halfway and focusing by press-
ing, it is also possible to manually change the automatically set
distance in autofocus mode with the distance setting dial.
• The setting is stored along with the exposure setting.
• In certain situations the AF system is unable to set the distance
correctly, e.g. when:
– the distance to the subject you are aiming at is outside the
setting range of the attached lens, and/or
– the subject is not sufficiently illuminated (see next section).
These situations and subjects are indicated by:
– Color of rectangle changes to red,
– With multiple field metering the display changes to a single red
rectangle
• When using Leica M lenses with the Leica M Adapter L available
as an accessory, only manual distance setting is possible.
• Depending on the Leica TL lens attached, the
point is supplemented by the measuring methods
and .
AFc Macro
Important:
The shutter release button is not locked, regardless of whether or
not the focusing is correct for the relevant subject.

AF auxiliary light

The built-in AF auxiliary light extends the operating range of the AF
system in poor lighting conditions. If the function is active, this light
comes on as soon as the shutter button is pressed.
►Select
Note:
The AF auxiliary light illuminates a range of approximately 4m. AF
mode is therefore not available at distances beyond this limit.
FOCUS MODE
AFs Macro
the required setting in
EN
145