Components; Correct Use - Meister MAS 144 Li-Ion Originalbetriebsanleitung

Noise/vibration information
Measured values determined in
accordance with EN 60745-1.
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another. The specified vibration
emission value can also be used for
preliminary evaluation of the
disturbance.
CAUTION! The vibration
emission value may fluctuate
from the specified value during use of
the electri cal tool. These fluctuations
will depend on the way in which the
tool is used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the tool is switched off and
times in which it is switched on, but is
running without load.)
3 – Components
1 Drill chuck
2 Torque setting 16+1
3 On/Off switch
4 Clockwise/anti-clockwise running
5 Rechargeable battery
6 Charger
7 Mains adapter
8 Charging plug
9 Unlocking button
10 SPEED switch (1
11 Magnetic rest
12 Battery charging display
st nd
/2 gear)
13 LED for charge control
14 LED working light
15 2 double bits, 45 mm
4 – Correct use
Drilling in wood and metal, screw-driving.
Employ the machine, charging unit and
accessories (follow manufacturer's
directives!) for specified area of
application only! All other applications
are explicitly excluded.
The machine is intended only for use in
the household.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to ensure
that they do not play with the device.
Improper use of the product
All applications carried out with the
device that are not listed in the „Proper
use" chapter will be considered
improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Tool inserts that do not fit precisely to
the sanding spindle of the electrical tool
will rotate unevenly, vibrate very heavily
and may lead to a loss of control.
There is a risk of injury. The user of the
device is liable for all property and
41