[For the customers in U. S. A.]
WARNING
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
For 100 to 120 V
Parallel blade with ground pin
Plug Cap
(NEMA 5-15P Configuration)
Type SVT or SJT,
Cord
Three 16 or 18 AWG wires
Length
Maximum 15 feet
Rating
Minimum 10 A, 125 V
Für 100 bis 120 V
Parallelklingen mit Erdungsstift.
Steckerkappe
(Konfiguration NEMA 5-15P)
Typ SVT oder SJT, dreiadrig
Kabel
(16 oder 18 AWG)
Länge
Maximal 4,50 m
Nennbelastbarkeit
Mindestens 10 A, 125 V
For 220 to 240 V
None
Type SVT or SJT,
Three 16 or 18 AWG wires
Maximum 15 feet
Minimum 10 A, 250 V
Für 220 bis 240 V
entfällt
Typ SVT oder SJT, dreiadrig
(16 oder 18 AWG)
Maximal 4,50 m
Mindestens 10 A, 250 V