Medion LIFE E74023 (MD 83709) Bedienungsanleitung Seite 145

only), until the device changes channels, switch-
es off or responds accordingly. The code search be-
gins with the code that is currently stored. While
the search is running, the display reads
SEARCHING... (along with the selected device
type). The current code is also displayed on the
bottom-right of the display. If you miss the code,
you can press the PROG− key to go back.
 When the device responds accordingly each time a
button is pressed, press OK to save the code.
The SUCCESS confirmation message appears.
The remote control will then return to normal opera-
tion.
When all the codes for the previous device type have
been selected, END SEARCH appears in the dis-
play.
28