One-Second Or Three-Second Intervals; Code Search By Brand Name - Medion LIFE E14008 (MD 20298) Bedienungsanleitung

One-second or three-second intervals

If you would like the remote control to transmit a new code every three seconds
instead of every second, proceed as follows:

Press P/CH+ (or
every three seconds. This gives you more time, but the procedure will also take
longer.

Code search by brand name

This function allows you to search by brand name. You will find the brand name in
the list below. Proceed as follows:

Switch on the relevant device manually.

Briefly press the required source button (STB, DVD, VCR, AUX).

Keep the CODE button pressed for approx. three seconds until the blue LED stays
lit.

Enter the one-digit code according to the list. Here's an excerpt:
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 7
Button 0

Continue pressing the P+ button (or for video recorders
device responds appropriately. Proceed quickly, otherwise the automatic code
search will start.

Save the code by pressing OK.
After all the codes have been searched, the blue LED will flash for approx. three
seconds.
16
) twice. The remote control will now only transmit a new code
TEVION, MEDION
Philips, Radiola, Philco, Erres, Pye
Sony, Akai, Panasonic, JVC, Sharp, Toshiba, Daewoo
Thomson, Brandt
Saba, Nordmende, Telefunken
Grundig, Blaupunkt
Nokia
All brands
English
or PLAY ), until the