The Lwlvision-Usb 2.0 Series - G&D LwLVision-USB 2.0 Installationsanleitung

The LwLVision-USB 2.0 series

NOTE:
Information on how to operate and configure the LwLVision system are
given in the separate »Installation and Operating Guide«.
KVM extenders of the LwLVision-USB 2.0 series transmit keyboard, mouse and USB
signals as well as the video signal between a remote console and the computer.
Additionally, the KVM extender supports bidirectional transmission of audio signals
and also transmits signals of a serial device between the remote console and the com-
puter.
An LwLVision system consists of two main components:
 Computer module: The computer to be operated is connected to the computer
module (LwLVision-PC).
In addition to the remote console, an (optional) local console can be installed at
the computer module.
 User module: The devices of the remote console (monitor, keyboard, mouse, and
USB devices) are connected to the user module (LwLVision-Rem).
Fibre optics connect the computer module to the user module. The maximum dis-
tance to be bridged depends on the quality of the fibre optics:
Type of fibre optics
Multi-mode fibre
Single-mode fibre
NOTE:
The KVM extenders of the LwLVision-USB 2.0 series are available as mulit-
mode or as single-mode variant.
The LwLVision-USB 2.0 series
max. cable length
550 metres
2 kilometres
G&D LwLVision-USB 2.0 · 3