HomeMatic HM-LC-Dim1T-Pl-3 Bedienungsanleitung Seite 32

• To activate teach-in mode, click „BidCoS-RF teach-in
mode" in the next window.
• Teach-in mode remains activated for 60 seconds.
An information box shows how much teach-in time
remains.
• Meanwhile, please activate the teach-in mode of the
dimming acutator to teach-in as well.
• Therefore, press and hold down the channel button
for at least 4 seconds. The device LED will flash con-
tinuously to indicate that teach-in mode is active.
• After a short time, the newly taught-in device will ap-
pear in the inbox of your software interface. The but-
ton „Inbox (x new devices)" indicates how many new
devices have been taught-in successfully.
• If required, you can teach-in additional devices by re-
peating the steps described above for each device.
• Now configure the newly taught-in devices in the in-
box as described in the next section.
32