Safety; Symbols Used; Warnings - Me capaNCDT 6019 Betriebsanleitung

Safety

1.
The handling of the sensor assumes knowledge of the instruction manual.
1.1
The following symbols are used in this instruction manual:
i
1.2
Disconnect the power supply before touching the sensor surface.
> Static discharge
> Danger of injury
Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.
> Danger of injury
> Damage to or destruction of the sensor and/or controller
Avoid banging and knocking the sensor and controller
> Damage to or destruction of the sensor and/or controller
The power supply may not exceed the specified limits.
> Damage to or destruction of the sensor and/or controller
Protect the sensor cable against damage
> Destruction of the sensor
> ailure of the measuring device F
capaNCDT 6019
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moderate
injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates a user action.
Indicates a user tip.

Warnings

Page 23