Denon AVR-2802 Bedienungsanleitung Seite 25

2
Play a program source with the
• For operating instructions, refer to the manuals of the respective components.
3
Set the surround parameter mode.
SURROUND
SURROUND
PARAMETER
PARAMETER
MENU/GUIDE
(Main unit) (Remote control unit)
The on-screen display differs according to whether the operation is performed from the main unit or
the remote control unit.
4
Select the play mode.
SELECT
(Main unit) (Remote control unit)
Display
MODE CINEMA MODE MUSIC
5
Select the various parameters. (See "Surround parameters q" for a description of the various parameters.)
SURROUND
PARAMETER
(Main unit) (Remote control unit)
MODE CINEMA MODE MUSIC MODE PRO LOGIC
CINEMA EQ PANORAMA CINEMA EQ
DIMENSION
CENTER WIDTH
6
Set the various surround parameters.
SELECT
(Main unit) (Remote control unit)
mark.
Display
MODE CINEMA
MODE PRO LOGIC
When set with the on-screen display using
the remote control unit while in the MUSIC
mode, set the " " mark to "OPTION 0"
using the and cursor buttons, then
press the cursor button.
Press the ENTER button to return to the
previous screen.
7
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons
on the remote control unit, press the SURR.
PARA. button to finish.
NOTE:
• There are four Dolby Surround Pro Logic modes
(NORMAL, PHANTOM, WIDE and 3 STEREO).
The AVR-2802 sets the mode automatically
according to the types of speakers set during the
system setup process (page 10).
Surround parameters q
Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes ("Cinema", "Music" or "Pro Logic").
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phantom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
Dolby Digital mode (only with digital input) and DTS Surround mode
(only with digital input)
1
Select the input source.
Playback with digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 13).
FUNCTION
VDP
2
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or "DTS".
INPUT MODE
INPUT MODE
(Main unit) (Remote control unit)
2
Select the Dolby/DTS
DOLBY / DTS
SURROUND
Surround mode.
(Remote control unit)
When performing this operation from the main
unit's panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro logic or DTS NEO:6.
SURROUND SELECT
MODE
(Main unit) (Remote control unit)
ENGLISH
1 3
B
VOLUME LEVEL
3 1 2 4,5 2,6
RC-904
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
1
4 5 6
VCR-1 CD CDR / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
2
DSP SIMULATION 5CH / 6CH STEREO STEREO
MASTER VOL.
1 INPUT MODE ANALOG EXT.IN
TAPE CDR/MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
4
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
5 CH SELECT
6
ENTER
MODE PTY
SELECT
MEMORY RT STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
25