Setting The Display Characters; Char Setup - Sony MEX-5DI Bedienungsanleitung

Setting the display
characters
— Char Setup (Spectrum analyser/Panorama/
Wall paper/Screen saver/Slide show mode)
You can adjust the visibility of the display by
changing the translucence ratio of the display
characters.
Making display characters disappear
automatically (Auto Clear)
You can make display characters disappear for a
moment in Spectrum analyser/Panorama/Wall
paper/Screen saver/Slide show mode. When set
to ON, you can display the display characters
only when the disc, album, or track is changed or
the source or display mode is changed. You can
enjoy full images.
1
Playback or receive the source (radio,
CD, MS, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select

"Char Setup."

Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER).
5
Press M or m to select "Auto Clear."
6
Press (ENTER).
7
Press M or m to select "ON."
8
Press (ENTER).
9
Press (GRAPHIC).
The display returns to the normal display.
Note
In Standard/Clock mode, you cannot make the display
characters disappear automatically.
40
Changing the translucence ratio of the
characters (Blend Level)
You can set the translucence ratio (colour
density) of the characters in the Spectrum
analyser/Panorama/Wall paper/Screen saver/
Slide show mode.
By setting this level down, you can adjust the
characters in the display to appear opaque.
1
Playback or receive the source (radio,
CD, MS, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"Char Setup."
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER).
5
Press M or m to select "Blend Level."
6
Press (ENTER).
7
Press < or , to select the
permeation ratio (Level 0-15).
The lower the level, the paler the display
characters.
8
Press (ENTER).
9
Press (GRAPHIC).
The display returns to the normal display.
Notes
• In Standard/Clock mode, you cannot change the
translucence ratio of the display characters.
• Set "Auto Clear" to "ON" (page 40), the translucence
ratio of the display characters does not change.