Making Calls; Making An External Call; Ending A Call; Accepting A Call - Gigaset S400 Professional Bedienungsanleitung

Making calls

Making calls
If the backlight is deactivated (
it is switched on by pressing any key. In
this case the pressed key has no other
function.

Making an external call

External calls are calls using the public tel-
ephone network.
~ c
Enter the number and press
the talk key.
or:
c ~ Press and hold the talk key c
and then enter the number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
Please note
Dialling with the directory
¢
( page 28), call list (
¢
redial list ( page 32) and automatic
¢
redial ( page 32) saves you from
repeatedly keying in phone numbers.
Continuing a call on a Bluetooth headset
Prerequisite: Bluetooth is activated; a
connection has been established between
the Bluetooth headset and the handset
¢
( page 44).
Press the talk key on the headset; it may
take up to 5 seconds to establish a connec-
tion to the handset.
You can set the earpiece and microphone
volume during the call using the side keys.
For further details about your headset, see
the accompanying user guide.

Ending a call

a
Press the end call key.
26
¢
page 47)
¢
page 32),

Accepting a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
Accept the call by:
¤
Pressing the talk key c.
¤
Pressing the speaker key d.
¤
press the display key
If the handset is in the base/charger and
the Auto Answer function is activated
¢
( page 48), the handset automatically
answers the call when you remove it from
the base/charger.
To deactivate the ringtone, press the
display key. You can accept the call
§Silence§
as long as it is displayed on the screen.
Accepting a call on a Bluetooth headset
Prerequisite: Bluetooth is activated; a
connection has been established between
the Bluetooth headset and the handset
¢
( page 44).
Only press the talk key on the headset
when the headset rings; it can take up to
5 seconds.
You can set the earpiece and microphone
volume during the call using the side keys.
For further details about your headset, see
the accompanying user guide.

Calling Line Identification

When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
u
Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): the caller's number is dis-
played.
u
You have requested CLIP from your net-
work provider.
.
§Accept§