Sony RM-VL700T Bedienungsanleitung Seite 25

1
Press SET.
All Component Select buttons
flash.
2
While holding % pressed,
press 2 + or 2 –.
To set all volume controls to
AMP
Press 2 + while holding %
pressed.
All Component Select buttons
light up when you press these
buttons, and then turn off
when you release them.
When you press 2 + holding
% pressed.
The buttons turn off when you
release them.
Volume control setting
complete.
To set only the audio
components' volume controls
to AMP
Press 2 – while holding %
pressed.
Only AMP lights up when you
press these buttons, and then
turns off when you release
them.
When you press 2 – holding
% pressed.
The buttons turn off when you
release them.
Volume control setting
complete.
Visual components are:
TV, video cassette recorder,
analog cable box, analog
satellite, digital satellite, DVD
player
Audio components are:
CD player, MD player,
cassette deck, amplifier
To cancel setting, press SET.
Note
If you used the Learning function to
program the 2 +/– or % buttons to
send a signal to a component, the
procedure above will not change the
function of the 2 +/– and % buttons.
GB
25