Linksys WAG54G Benutzerhandbuch Seite 72

Wireless-G ADSL Gateway
8. The IP Filter List screen should appear, as shown in Figure C-7. Enter an appropriate name, such as Gateway-
>win for the filter list, and de-select the Use Add Wizard check box. Click the Add button.
9. The Filters Properties screen will appear, as shown in Figure C-8. Select the Addressing tab. In the Source
address field, select A specific IP Subnet, and enter the IP Address: 192.168.1.0 and Subnet mask:
255.255.255.0. (Enter your new values if you have changed the default settings.) In the Destination address
field, select My IP Address.
10. If you want to enter a description for your filter, click the Description tab and enter the description there.
11. Click the OK button and the New Rule Properties screen should appear with the IP Filer List tab selected, as
shown in Figure C-9. There should now be a listing for "Gateway -> win" and "win -> Gateway". Click the OK
(for WinXP) or Close (for Win2000) button on the IP Filter List window.
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
How to Establish a Secure IPSec Tunnel
Figure C-7: IP Filter List
Figure C-8: Filters Properties
Figure C-9: New Rule Properties
65