Sharp MD-MT877H Bedienungsanleitung Seite 141

Sound-actuated recording
(Mic Synchronised recording)
1
Press the REC button.
2
Press the 5 5 or 4 4 button to adjust the
5 5 5 4 4 4
recording level.
Level meter indicator
3
Press the MODE button repeatedly to se-
lect recording mode (page 23).
4
Press the ENTER button to select the record-
ing sensitivity.
MIC SYNC H : Recording starts when the unit
detects –24 dB or more
(The unit can start recording from
quiet sounds).
MIC SYNC L : Recording starts when the unit
detects –12 dB or more.
5
When a sound, such as person speaking, is
picked up by the microphone, recording will
begin automatically.
About pause function
The unit automatically pauses when the microphone does
not pick up any sound for 3 seconds or more. (Pause func-
tion does not work for approximately 10 seconds after a re-
cording starts.) When the microphone picks up sound again,
recording starts automatically.
Notes:
Whilst making a mic recording, do not connect anything
to the OPTICAL/LINE IN socket on the portable MD.
To use a microphone, be sure it is a plug-in-power type
0dB
microphone.
When a plug-in-power type microphone is plugged in,
4dB
•
the portable MD will provide power for the microphone's
operation.
If a different type of microphone is plugged in, it may
•
not operate properly or it may cause the unit to mal-
function.
Insert the plug firmly. If you don't, the recording will not be
made properly.
Use a microphone with a 3.5 mm (1/8") diameter stereo
mini plug.
If the unit starts recording too often from low unwanted
noises, set the microphone input to "MIC SYNC L".
Recording sensitivity can be changed whilst recording.
E-30