Device Management; Hdd Management - urmet domus 1093 Bedienungsanleitung

5. Refer to below for [Audio on] setting procedure. (Setting parameter will be available after re-starting multimedia player after
[Audio on] set up.)
Setting Audio channel setting
has audio files Apply OK
After successfully setting the above, when you playback the current channel, you can open the channel's audio function at
the same time as the video
10.2.6

DEVICE MANAGEMENT

HDD management

10.2.6.1
DS1093-027
Normal video Bar Select the channel you want to playback the audio Select
Options in device management include Hard drive, External Alarm, PTZ
control, Mobile Phone Monitoring, and Motion Detection.
When you install a HDD, the system will automatically detect if HDD is formatted
or not; If HDD needs to be formatted, HDD status will be shown as "Not format",
otherwise, the HDD status will be shown as "Normal"
TOTAL SPACE: Indicates total space available on Hard Drive.
FREE SPACE: Indicates unused space available on the Hard Drive.
USEABLE REC TIME: Based on current image detail/quality and frame rate,
system will show you how Recording time you have left on the Hard Drive.
OVERWRITE: If you select "on" the system will automatically overwrite the
oldest recordings once the hard drive is full; if you select "off", recording will stop
once the hard drive is full.
HDD FORMAT: You use this option to format the hard drive, you can not record
files to the hard drive until it has been formatted. Click [Format HDD] button to start
formatting. When selecting [Format HDD] option the system will prompt you –
"Format HDD will loss all the data, do you confirm?" ; click "OK", system will prompt
you – "Is formatting..." and "successful format"; and then system will restart
automatically.
USB FORMAT: Use this option to format USB devices
59
the channel