Siemens sitrans f Handbuch Seite 25

Create a Site
1. Press <Right Arrow> key and then <Up/Down Arrow> keys to select [Create/Name Site].
2. Press<Right Arrow> key to select the "?" symbol (see figure below).
3. To create site name use the <Up/Down> and <Right Arrow> keys to select a name.
4. Press <ENTER> key to save the Site name.
5. Press <Left Arrow> key and return to [Channel Setup]. Press <Down Arrow> to select [Pipe
Select Pipe Class
1. Press <Right Arrow> key to select [Pick Pipe Class].
2. Press <Right Arrow> key again. Press the <Up/Down Arrow> keys to scroll to desired Pipe
3. Press <ENTER> key to select Pipe Class.
FST020 IP65 NEMA 4X
Operating Instructions, 07/2010, A5E03086489-01
①
Site name filed is initially blank
②
(?) indicates cell is ready to accept data. Cursor shown in first character position.
Note
To set English or Metric units: In [Meter Type] menu, scroll to [Meter Facilities] menu.
Press <Right Arrow> and select desired units. Press <ENTER> to select. Press <Left
Arrow> and <Up Arrow> keys to return to [Meter Type] menu.
Note
To select alphanumeric characters: Press <Right Arrow> to cursor and then press <Up/
Down Arrow> keys to select letters and numbers.
Data].
Note
After the site configuration procedures that follow are complete the newly created site
must be saved again to retain the new site data. Refer to the Save/Rename Site procedure
below.
Class.
Commissioning
4.2 Programming the Transmitter
23