Operating the generator
8.4
Starting the generator
The generator can only be started if it is in standby and the control panel is
switched on.
I
NOTE
If the generator is still warm, press the start button briefly to start
it; press longer for a cold generator.
➤ Start up the generator with the start button (fig. 3 3, page 3).
8.5
Stopping the generator
➤ Stop the generator with the on/off switch (fig. 3 2, page 3).
If the generator does not stop: switch it off with the main switch (fig. 2 1,
page 3).
➤ Check that there are no leaks where oil or diesel oil can drop out.
Stopping the generator for a prolonged time
➤ Switch it off with the main switch (fig. 2 1, page 3).
➤ Disconnect the battery.
40
TEC30EV
EN