Zi-Md500H - Zipper ZI-MD300 Betriebsanleitung

14.1.2 ZI-MD500H

 Position the bottom panel inside the mounting bracket.
 Align the holes with the mounting bracket.
 Insert a long pin through holes and secure each side with a
flat washer and cotter pin.
Snow blade:
 Mount the mounting bracket to the blade using M8×30 hex
bolts, washers and nuts.
 Position the pivot bracket inside the mounting bracket and
align with mounting bracket holes. Secure with M20×95 hex
bolt, washers and nut.
ZIPPER MASCHINEN GmbH
ZI-MD300 / ZIMD500H
www.Zipper-Maschinen.at
ASSEMBLY
35