Connecting The Fm Antenna - Samsung HT-D6759W Bedienungsanleitung

Connections
HDMI IN : Connecting to an External Component with an HDMI Cable
1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack
on your digital device.
2. Press the FUNCTION button to select H. IN1 or H. IN2 input.
The mode switches as follows : BD/DVD
HDMI Auto Detection Function
If you have connected your home cinema by HDMI cable, the home cinema's video output
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions,
see page 31.
•
This function is not available if the HDMI cable does not support CEC.
•
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display
device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being
made.
!
CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the
product.
FM Antenna (supplied)
FM ANT
22
English
HT-D6759W_ZG_0323.indd 22 HT-D6759W_ZG_0323.indd 22
D. IN

Connecting the FM Antenna

1.
2.
✎

WIRELESS WIRELESS
AUX R. IPOD W. IPOD
Connect the FM antenna supplied to the FM
ANTENNA Jack.
Slowly move the antenna wire around until you fi nd a
location where reception is good, then fasten it to a
wall or other rigid surface.
NOTE
This product does not receive AM broadcasts.
H. IN1 H. IN2 FM
2011-03-23 2011-03-23 10:03:01 10:03:01