Connection Configuration On The Flow Pressure Controller Type 8624-2 - bürkert 8624-2 Bedienungsanleitung

5.3 Connection configuration of flow pressure controller
type 8624-2
M12, 4-pole
Supply voltage
standard signal input
External setpoint
Fig.: Connections on flow pressure controller type 8624-2
M12 (4-pole): Supply voltage and standard signal for setpoint
2
3
(white)
(blue)
4 1
(black) (brown)*
M8 (3-pole) Standard signal input, sensor
4
(black)
1 3
(brown) (blue)*
ATTENTION!
and
Configuration
1 24 V DC supply voltage
2 Standard signal input, external setpoint
3 GND external setpoint
4 GND supply voltage
* wire colours when using standard cables with M12 plug
(4polig)
Configuration:
1 24 V DC output
3 GND
4 Standard signal input, sensor
* wire colours when using standard cables with M8 plug
(3pole)
Do not connect a voltage to pin 1 of the 3-pole plug! Pin 1 is a
24 V output to supply the sensor (e.g. 2-conductor
transmitter)
M8, 3-pole
Standard signal input
Sensor
8624-2 Standard - 11