Safety Instructions
Installation / Electrical safety
▪
The device may only be connected when the mains voltage corresponds to the infor-
mation on the type plate of the unit.
▪
The mains connection must be accessible at all times.
▪
Repairs may only be performed by a qualified electrician.
▪
Never operate the unit with a damaged power cord.
▪
Always turn the unit OFF and disconnect mains power before performing any
maintenance or service.
Personnel qualification
▪
The device may only be operated by qualified persons.
▪
The device may only be operated by individuals who have been instructed in its
proper use by qualified persons.
▪
The device may only be operated and maintained by persons who are of legal age.
▪
Other personnel may only work with the unit under continuous supervision of an
experienced qualified operator.
▪
This manual must be read and understood by all persons working with the device.
▪
The personnel must have received special safety instructions in order to guarantee
responsible and safe work procedures.
Operating company's obligations
Installation site
▪
The device must be positioned in a suitable location.
▪
The device must be installed sufficiently stable.
▪
All screw connections must be securely tightened.
▪
Installation and operation of the device is only permitted in facilities which are fitted
with the appropriate laboratory equipment (e.g. with air extraction units).
▪
We recommend operation in fume hood enclosures.
▪
The device may only be operated in enclosed spaces and under the following environ-
mental conditions:
Ambient temperature
Changes to the unit
▪
No unauthorized changes may be made to the unit.
▪
No parts may be used which have not been approved by the manufacturer.
▪
Unauthorized changes result in the CE Declaration of Conformity losing its validity,
and the unit may no longer be operated.
▪
The manufacturer is not liable for any damage, danger or injuries that result from
unauthorized changes or from operating the unit other than described in this manual.
85 % relative humidity, no condensation
0 - 40 °C
7