Staufenbiel MINI HAWK III REVOLUTION Montageanleitung Seite 23

COMPLETION
The model assembly is now complete and you can get started with the channel programming. Check the
running direction of servos one more time. Please make note of the rudder deflections as well as the exact
center of gravity in the table. For landing, the aileron should lifted as a brake flap.
Now you can enjoy your first flight with your new MINI HAWK III. With the information contained within
these instructions, this model holds no unpleasant surprises for you. At the same time, it is a good idea for
an experienced RC pilot to launch it for the first time.
Now get ready for some amazing and dynamic flying sessions with your new MINI HAWK III.
Team Staufenbiel
SETTINGS
CENTER OF GRAVITY:
C.G.:
CONTROL THROWS:
Function
Ailerons:
Elevator:
Spoilers:
47-52mm behind the leading edge, recommended 51mm
Normal:
▲ ▼
10 mm / 7 mm / 35% Expo
▲ ▼
3 mm / 3 mm
▲
13 mm, with Elevator
▼
1 mm
EN
23
www.staufenbiel-shop.com
info@modellhobby.de
+49 40 30061950