Alecto dbx-37 Gebrauchsanweisung Seite 12

INSTALLATION
POWER SUPPLY:
For portable use, the transmitter and receiver can be powered by one piece 9V
battery each (excluding). Open the battery-compartment and insert the battery
For non-portable use, the transmitter and the receiver can be powered by the
supplied power-adapters. The DC input can be find on the right side of the trans-
mitter or receiver.
BELTCLIP:
With the aid of the beltclip the receiver can be easily carried on a belt.
REMARKS:
Power supply: A power adapter is included for the transmitter and for the receiver
as well. The power adapters are of the same type.
Battery use: When the set is battery-operated, the use of ALKALINE batteries is
recommendable. Also rechargeable batteries can be installed but they have to be
recharged in separate chargers. The DBX-37 has no provision to charge these
batteries.
When the set is not in use for a longer period, please remove the batteries to
prevent leakage, which might damage the electronic circuit.
Never throw away empty batteries but hand them over to your local
depot for chemical waste.
At the end of the product lifecycle, you should not throw this product
into the normal household garbage but bring the product to a collection
point for the recycling of electrical and electronic equipments.
12