oelmann LX2 Bedienungsanleitung Seite 14

Charging the pager
The charger is designed to charge rechargeable NiCd and NiMH
batteries of pagers.
Do not put a pager that is operating on a not rechargeable
battery into your charger – risk of explosion!
Putting the pager into the charger
Open the hinged frame of the charger and put the pager into the
charger. Afterwarts close the hinged frame with light pressure until
the frame locks. The pagers display now shows the
The charging will immediately start.
The charging time depends on the respective capacity and current
potential of the rechargeable battery used. When charging is
completed, the charger will automatically switch to trickle charging.
charging of the pager:
charge indicator yellow on
trickle charging of the pager:
charge indicator green on
Removing the pager from the charger
Open the hinged frame with light pressure and remove the pager
from the charger. The charging is immediately interrupted.
charge indicator green flashing (30s):
Factory-new batteries obtain their maximum capacity only
after having been charged and discharged several times.
symbol.