Footrests - Tunturi C60 Betriebsanleitung

Push the stand feet to the rear support ends and attach
the rear support to the main frame with two bolts,
washers and locking sleeves.
FRONT FRAME TUBE
Remove the rubber band from around meter cable
coming from the frame tube. Attach the meter cable to
the connector coming from the front frame tube. Push
the front frame tube inside the frame tube: do not
damage the meter cable! Attach the front frame tube
tight to the frame with the washers and attachment
screws.

FOOTRESTS

Attach the footrests to the position of your choice on
the pedal shafts with two screws, two washers / screw
and locking nuts.
4
ARMS
Push the metal shaft through the bracket housing of
the left arm. Attach now the left arm to the front frame
tube by pushing the metal shaft through the opening
in the tube. Push the right arm on the shaft and lock
it by tightening a large washer, a locking sleeve and a
screw to the both ends of the shaft. Tighten the arms
using two Allen keys.
Push the left footrest support forward so that you
can push the tube in the front of the foot rest support
inside the arm tube. Lock the tube with the locking
screw. Repeat the procedure with the right footrest
support.