Noise/Vibration Information; Mounting And Operation - Bosch AdvancedGrassCut 36 Originalbetriebsanleitung

OBJ_BUCH-1929-002.book Page 16 Thursday, December 1, 2016 3:12 PM
16 | English
Trimmer
Weight according to EPTA-
Procedure 01:2014
Protection class
Battery Charger
Article number
Charging current
Allowable charging temperature
range
Charging period (battery dis-
charged)**
– 1.3
– 2.0
– 2.6
– 4.0
Weight according to EPTA-
Procedure 01:2014
Protection class
Serial number
*with AL 3620 CV Professional charger

Noise/Vibration Information

Sound emission values determined according to
EN 60335-2-91.
Typically the A-weighted noise levels of the product are:
Sound pressure level 74 dB(A); sound power level 91 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60335-2-91:
2 2
a =2 m/s , K=1 m/s .
h

Mounting and Operation

Action
Delivery Scope
Connecting the shaft
Mounting the Auxiliary Handle
Mounting the Cutting Guard
Charging the Battery Pack
Inserting and removing the battery
pack
Switching On and Off
Working Advice
Changing to edging mode
Feeding the Line
F 016 L81 448 | (1.12.16)
Advanced- Action
GrassCut 36
Winding Line on Spool
Replacing the Line Spool
kg 0.6
Fitting Spool into Spool Holder
/II
Maintenance, Cleaning and Storage
AL 3640 CV
Selecting Accessories
Professional
EU 2 607 225 099
Starting
UK 2 607 225 101
AU 2 607 225 103
For Your Safety
A 4.0
 Warning: Switch off and remove battery from machine
before adjusting or cleaning.
°C 0 – 45
 The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching "on" again.
min 45
 Do not rapidly switch off and on.
min 45
 Remove any grass from spool cover when changing line
min 65
or spool.
min 80
 Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
kg 1.0
Battery Charging
/II
 Do not use other battery chargers. The supplied battery
see type plate on the
garden product
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
Figure Page
ion battery against deep discharging. When the battery is run
1 248
down or discharged, the garden product is shut off by means
2 248
of a protective circuit: The garden product no longer oper-
ates.
3 249
4 249
been automatically switched off. The battery can be dam-
aged.
5 250
6 250
7 251
8 252
9 253
Figure Page
10 253
11 254
12 – 13 254
14 255
15 255
Do not continue to press the On/Off
switch after the garden product has
Bosch Power Tools