Adjusting The Sanding Table; Attaching, Replacing And Adjusting The Sanding Belt - Westfalia RBDS-46A Bedienungsanleitung

Adjusting the Sanding Table

To be able to sand precise right angles, the sanding table must be adjusted in a
perfect right angle.
1. Place an angle gauge on the table and adjust the table after loosening the
locking knob. If you want to sand in another angle, you ca use the scale to set
the table to another angle.

Attaching, Replacing and Adjusting the Sanding Belt

1. Remove all belt covers and the fence after you have removed all mounting
screws. The belt cover is attached with four screws.
Angle Scale (37)
Operation
20
Right Angle
Gauge
Sanding Table (35)
Locking Knob (1)
2 Screws
(marked)
2 Screws on Back