Vibration Load - AL-KO MT 40 Betriebsanleitung

GB
■
Before removing jammed
branches, switch off the appli-
ance and wait until the cutting
blade has come to a standstill.
■
Remove the rechargeable
battery from the basic appli-
ance and push the protective
cover over the cutting blade
for:
■
Testing, adjustment work
and cleaning work
■
Working on the cutting
blade
■
Leaving the appliance
■
Transport
■
Storage
■
Maintenance and repair
work
■
Danger
■
Maintain a minimum distance
of 10 m to overhead electrical
lines.
24

3.8.2 Vibration load

WARNING!
Danger due to vibration
The actual magnitude of
the vibration emissions
during the use of the appli-
ance may deviate from
that stated by the manu-
facturer. Observe the fol-
lowing influencing factors
before or during use:
■
Is the appliance being
used as intended?
■
Is the material being cut
or processed in the
proper manner?
■
Is the appliance in a
proper condition of use?
■
Is the cutting tool prop-
erly sharpened or is the
correct cutting tool in-
stalled?
■
Are the handle grips
and any optional vibra-
tion grips mounted, and
are they firmly attached
to the appliance?
■
Only operate the appliance at
the motor speed required for
the respective work. Avoid us-
ing the maximum speed in or-
der to reduce noise and vibra-
tions.
Safety instructions
HTA 4045