Using The Blender - Beper 90.475 Betriebsanleitung

Food Processor Use instructions
Operation:
·Follow the diagram flow pictured to the right for
step by step assembly.
·Ensure the bowl in step 2 and the lid in step 4
is locked well or the machine will not work.
·After operation, you can disassemble by following
the opposite flow and direction.
·Always be careful when handling the stainless
steel knife blades as they are very sharp.
·After operation, only open the lid when the blades
are completely stopped. For extra caution, you can
unplug the appliance before removing the lid.
To keep the best processing result:
·Plastic Knife Blade for dough (no more than 500g flour with
300g water), start machine with min. speed for around 10-20
seconds, and then turn to little bigger and bigger speed. Not
exceed 1/3 speed.
·Stainless Steel Knife Blade for meat chopping, use the max
speed.

USING THE BLENDER

* Run the blender within 2 min. and then rest at least 1 min. Do
not use the machine for more than two operations. Allow it to
cool between operations.
* Never open the lid when the blade is still rotating. For extra
caution, you can unplug the appliance before removing the lid.
* To add liquid ingredients during processing, remove the me-
asuring cup of the lid and pour liquid through the opening in
the lid.
* Cut solid ingredients into smaller pieces before you process
them.
* For a large quantity, pour small batches of ingredients inste-
ad of a large quantity at one time.
* Use cooked ingredients for a soup preparation.
* If a liquid is hot or tends to foam (e.g. milk), do not put more than 1 litre in the blender jar to avoid
spillage.
* If the result is is not satisfactory, switch the appliance off and stir the ingredients with a spatula.
1. Follow the diagram flow pictured to the right for Step 1 to step 5 by step assembly.
2. Fit the sealed ring into the Blender Base
and ensuring the sealed ring is located correctly In case any leaking.
3. Put your ingredients into the jug.
4. Place the measuring cup in the lid and place the lid on the jar.
5. Place the plastic jar onto the motor body unit and twist to lock.
6. Select a speed or use the pulse control.
7. Do not move the jar. Keep the lid on when the machine is operating.
To keep the best processing result: use the Max speed or Pulse speed.
13