Overview; Device Elements; Operating Field; Colour Coding - Kärcher HDS 6/10 C Bedienungsanleitung

Overview

Device elements

Figure 1
1 Support for spray lance
2 Manometer
3 Recess for detergent suction hose
4 Recessed grip (both sides)
5 Connection for water supply with filter
6 Water supply set
7 High-pressure connection EASY!Lock
8 High pressure hose EASY!Lock
9 Spray lance EASY!Lock
10 High-pressure nozzle (stainless steel)
11 Steam nozzle (brass)
12 Pouring vent for detergent
13 Steering roller with fixed position brake
14 Fuel sieve
15 Safety lever
16 Power supply
17 Triggering lever
18 Tool bag (HDS C only)
19 Safety latch of the hand spray gun
20 Trigger gun EASY!Lock
21 Pressure/ quantity regulation at the
hand spray gun
22 Pouring vent for fuel
23 Dosage valve for detergent

24 Operating field

25 Storage for hand spray gun
26 Connecting hose of the hose drum
(HDS CX only)
27 Step depression
28 Hose drum (HDS CX only)
29 Hand crank for hose drum (HDS CX only)
30 Handle
31 Nameplate
32 Cover lock
33 Storage compartment for accessories
34 Burner
35 Recess for spray pipe
36 Cover
37 System care Advance RM 110/RM 111
38 Pressure/quantity regulation of the
pump unit
39 Oil tank
40 Oil drain screw
41 Backflow valve of the detergent infeed
26
42 Detergent suction hose with filter
43 Fuel filter
44 Fastening clamp
45 Hose (soft damping system) of the wa-
ter shortage safeguard
46 Water shortage safeguard
47 Sieve in the water shortage safeguard
48 Fine filter (water)
49 Float tank
Figure 2
A Power switch
1 Indicator lamp rotation direction
(3-phase appliances only)
2 "Ready for use" indicator lamp
3 Fuel indicator lamp
4 Indicator lamp service
5 Indicator lamp for detergent
6 Indicator lamp system care
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.

Symbols on the machine

High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at persons, animals,
live electrical equipment or at the appliance
itself.
Risk of electric shock!
Only electricians or authorised
technicians are permitted to
work on parts of the plant.
Risk of burns on account of hot
surfaces!
Risk of poisoning! Do not inhale
exhaust fumes.
– 2
EN
Operating field

Colour coding