5.2. Inserting the batteries in the remote control
Remove the battery compartment cover on the back of the re-
mote control.
Insert two type LR03 / AAA/ 1.5V batteries into the battery com-
partment of the remote control. Check the battery polarity (in-
scribed on the bottom of the battery compartment).
Close the battery compartment.
WARNING!
There is a risk of explosion if batteries
are replaced incorrectly.
Replace batteries only with the same or equivalent
type.
The remote control could be damaged by leaking batteries if it is not used for long
periods of time!
Remove the batteries from the remote control if the device is not going to be
used for a long period of time.
5.3. Connections
Before connecting up the radio, switch it off using the power switch at the back of
the device.
Operation in WiFi mode: The device has an integrated WiFi antenna.
Operation in LAN mode: Connect an Ethernet cable to the RJ 45 port.
Operating the FM/DAB radio: Arrange the aerial at the back of the device for re-
ception.
Mains adapter: Connect the connector plug on the supplied mains adapter to
the DC IN port and plug the mains power plug into an AC 100–240 V ~ 50/60 Hz
socket.
LINE OUT: Connect an audio cinch cable to the LINE OUT socket to transfer the
stereo sound output of the Internet radio to other audio devices.
AUX IN: Connect a 3.5 mm stereo jack cable to the AUX-IN socket, in order to
play back stereo sound from other audio devices on the Internet radio.
USB: Connect a USB storage medium here to play back audio files on the storage
medium on the Internet radio.
DE
EN
TR
61 of 142