Onkyo CR-N775D Betriebsanleitung Seite 35

> Before Start > Part Names
amongst "Everyday", "Sunday", "Monday",
"Tuesday", "Wednesday", "Thursday", "Friday",
"Saturday", "Mon-Fri", "Tue-Sat", and "Sat-Sun" and
confirm. If you select "Once", select a day of the
week from amongst "Sunday", "Monday", "Tuesday",
"Wednesday", "Thursday", "Friday", or "Saturday"
and confirm.
7. Use 3/4 (b) to set the start time for the alarm, the
end time, and the volume (0 to 50) in turn, then
press ENTER (c) to confirm each selection.
0 The TIMER indicator lights when the settings are
complete, and the content you set is displayed on
the display.
8. Press Í (a) to switch the unit to standby.
0 The alarm does not work when this unit is on.
a
b
Check whether the alarm setting is On or Off: When
the TIMER indicator is on and red, the alarm is on. The
alarm is off if the indicator is off.
Turning the alarm setting On or Off: If the alarm is
already set, you can turn the function on or off.
> Install > Initial Setup
1. Press on the remote controller to display the
menu, press 3/4 (b) to select "Timer", then press
ENTER (c).
2. Press 3/4 (b) to select "Timer 1" or "Timer 2" and
press ENTER (c).
3. To turn off, press ENTER (c) when "Timer Off" is
displayed.
0 To turn on, press ENTER (c) when "Timer On" is
displayed.
0 Press 3/4 (b) to select "Timer Call", then press
ENTER (c) to check the content you set.
4. Press Í (a) to switch the unit to standby.
c
> Playback
Supplementary information | Advanced Setup | Others
35
En