HASE Delhi Bedienungsanleitung Seite 44

12. Technical Data Delhi 124
The Delhi 124, certified in compliance with DIN-EN 13240 and Art. 15 a B-VG (Aus-
tria), can only be operated when the fire box is closed; more than one device can be
connected to the chimney.
The following data applies to the chimney characteristics in accordance with
EN 13384-1 /-2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output
Efficiency
CO content
Particulate
OGC
NO
X
Min. Required Combustion Air Volume
* Test bench performance and values at 13% O
Depending on the insulation of the building, the nominal thermal output of 7 kW indi-
cated on 25 - 95 m² (subject to change).
Dimensions: Height
Stove 124,5 cm
Fire box
Weight:
¹ Vertical flue pipe length
Flue pipe diameter:
44
Pipe diameter of Hase ventilation system**
2
Width
48 cm
47 cm 33 cm
Front view Delhi 124
Wood
7 kW
7 kW
264 ˚C
350 ˚C
6 g/s
12 Pa
81 %
842 mg/Nm³
22 mg/Nm³
89 mg/Nm³
Ø 42
121 mg/Nm³
Ø 48
29 m³/h
Top view Delhi 124
Depth
48 cm
32 cm
138 kg
min. 15 cm
15 cm
** For separate air supply in low-energy houses and insufficient combustion air supply in the room where
10 cm
the stove is installed.
Side view Delhi 124
Ø 27
7,5
Connection area for the inst.
of Hase air system below
Dimensions in cm