Before the first Use
Dispose of packaging material or store it out of reach of children.
There is risk of suffocation for small children!
Before Installation
Before firmly installing the Camera on your vehicle, make sure all
parts are functioning properly.
Camera Installation
By using the suction cup, you can mount the mounting arm on
the windscreen.
When choosing a location to mount the camera, make sure
the camera and the cables are placed in such a way they will
not obstruct your vision while driving.
Do not mount the suction cup during direct sunlight. Surface
temperature should be between 21 °C and 38 °C (70 °F and
100 °F). Application below 10 °C (50 °F) should be avoided.
Mounting should be protected from exposure to direct sunlight
for a period of 24 hours.
1. Clean the surface on which the mounting arm will be mounted
carefully.
2. Flip the lever of the suction cup up and place the suction cup
in the desired place. Press the suction cup against the surface
and flip the lever down.
3. Snap the camera into the holding arm. The camera has a
notch into which a nose on the bracket fits.
4. Turn the holding arm and set the camera to the desired
position. The display of the camera can be used to review the
field of view Tighten the knobs on the arm hand tight. Minute
adjustments can be done by tilting the camera front lens.
Operation
14