Teuco 543 Installationshandbuch Seite 10

EN
MOUNTING PANELS WITH CLIPS + SCREW FIXING
Having fixed all the attachments, remount the panels previously removed following the order 3, 2, and 1.
Bring the panel near to the bathtub; press on the upper edge of the panel so that the panel is inserted between the springs
(M) and the bathtub edge.
Press the panel in the lower part near to the clips (Y) so that the clips enter into their respective seats.
Lift the panels using the supplied wedge (A).
Fix the panels with the screws and inserts (B).
Fit the screw covers using pressure (C).
MOUNTING PANELS 543 – 544
A – Press the top part of the front panel so that it clicks into the fastening clips.
B – Press the top part of the side panel so that it clicks into the fastening clips, then secure the two panels together, taking
care to make sure that the front panel enters the seating on the profile fixed to the side.
C – Place the holes in the panel over the plate as illustrated.
D – Use a wrench to tighten the screw.
A
C
10
B
D
B
C
A