Body-Mass-Index (Bmi) - Seca 685 Bedienungsanleitung

Store weight value (HOLD)
You can also continue displaying the weight determined once the load has been remo-
ved. This makes it possible to look after a patient first, before having to note the weight:
– Press the HOLD/TARE key whilst the
load is on the scale.
"HOLD" appears in the digital display.
The value is stored until the scale swit-
ches off automatically.
The triangle with the exclamation mark
indicates that this frozen display is an
additional facility which is not subject
to calibration.
– The HOLD function can be switched
off by pressing the HOLD key again.
0. 0
appears in the display if the scale
has no load on it, otherwise the current
weight. The "HOLD" display vanishes.
Note:
The HOLD and TARE functions can also be used simultaneously.

Body-Mass-Index (BMI)

Body Mass Index puts height and weight in relationship to one another, providing more
accurate information than ideal Broca weight, for example. A tolerance range is given
which is considered ideal for health. The Body Mass Index applies only to adults: these
values are not relevant to children and young people.
– Press the Start key.
se(a 8. 8 . 8 . 8 . 8 .
– , and
cutively in the display. The scale is
then automatically set to zero and rea-
dy for operation.
– Press the FUNC key.The last function
used appears in the display.
– Use the arrow keys to select the BMI
function FU 1.
– Activate the function by pressing the
FUNC key once again.
The patient's recorded height will then
appear on the display.
– You can use the arrow keys to adjust
the value in increments according to
the graduations displayed.
– Once the correct value is set, press the
FUNC key again. The BMI function is
now activated.
– Ask the patient to mount the scale.
Once on the scale, the patient should
stand still.
36
0. 0
appear conse-