WAGO LON FTT 753-648 Bedienungsanleitung Seite 17

WAGO-I/O-SYSTEM 753
®
753-648 LON FTT Module
The module is equipped with two connections for the bus line (LON
®
LON Bus B) for connection of the LON
In general, LON
The WAGO-I/O-PRO software is used to program the fieldbus nodes.
For implementation of complex control applications, a comprehensive
IEC-61131-3 library with simple modules is available.
The LON
configuration of the LON
The LON
configuration using the LON
More information about the LON
You can download the manual for the LON
WAGO Internet site at:
www.wago.com
Eight colored LEDs on the I/O module enclosure signal active and inactive
operating modes, data transfer via LON
bus power and internal statuses or errors of the I/O module (see Section "Display
Elements").
Pos: 22 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
V1.0.0
®
guidelines must be adhered to for network installation.
®
configurator integrated in the WAGO-I/O-PRO makes easy setup and
®
FTT module possible.
®
network interface of the LON
®
®
bus.
®
FTT module is defined by the variable
configurator.
®
configurator!
®
configurator free of charge from the
®
and the data bus, application of LON
Device Description
®
Bus A and
®
17