T-Net Mode / Private Exchanges; R" Button On Private Exchanges; R" Button And The Deutsche Telekom T-Net; Using Pause - AUDIOLINE 5300TECH Bedienungsanleitung

7

T-NET mode / Private exchanges

You can use the "R" signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM's T-Net functions.
7.1

"R" Button on Private Exchanges

If you have connected your telephone to a private exchange, you can use all the
facilities such as call transfer, automatic recall, etc. The "R" signal button gives
you access to these facilities. The FLASH time "100ms" will be required on a
private exchange (Adjustment, see 8.11). You can find out from the dealer from
whom the equipment was purchased whether your telephone will work on your
private exchange without any problems.
7.2

"R" Button and the DEUTSCHE TELEKOM T-Net

Your AUDIOLINE telephone supports the most important DEUTSCHE
TELEKOM added value functions (e.g. brokering, call waiting, three-way
conference, etc.). The T-Net works using the "FLASH 300ms" setting.
(Adjustment, see 8.11). Please contact DEUTSCHE TELEKOM to gain access to
T-Net functions.
7.3

Using Pause

With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0")
in order to obtain a dialling tone for an outside line on the extension. With some,
older private exchanges, it takes some time before the dialling tone can be
heard. Especially for these private exchanges, an automatic pause can be
inserted after connecting to the outside line so that you can dial directly without
waiting for the dialling tone.
Entering a pause when dialling manually
Press the redial button
actual telephone number. After connecting to an outside line your telephone will
wait for 3 seconds before dialling the actual telephone number.
The pause can also be saved with numbers in the phone book.
- T-NET/Private exchanges -
once between the number for the outside line and the
67