Loading Cutlery And Dishes - Electrolux ESF63020 Benutzerinformation

24 electrolux
Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during
the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1. Turn the cap anticlockwise to open the
rinse aid dispenser.
2. Fill the rinse aid dispenser with rinse aid.
The mark 'max.' shows the maximum
level.

Loading cutlery and dishes

Helpful hints and tips
Caution! Only use the appliance for
household utensils that are applicable
for dishwashers.
Do not use the appliance to clean objects
that can absorb water (sponges, household
cloths, etc.).
• Before you load cutlery and dishes, do
these steps:
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the subsequent washing pro-
gramme.
4. Replace and turn the cap clockwise to
close the rinse aid dispenser.
Adjusting the rinse aid dosage
The rinse aid is set at the factory at position
3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
1. Turn the rinse aid dial to increase or de-
crease the dosage.
– Increase the dosage if there are water
droplets or limescale on the dishes.
– Decrease the dosage if there are
streaks, whitish stains or bluish layers
on the dishes.
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.