Note Ambient Temperature - Siemens GS32NA90 Gebrauchsanleitung

en
3 super" display
(indicates 2 functions)
a) Display comes on
If fast freeze is on.
b) Display flashes
If a power failure occurred.
4 Temperature selection button
The freezer compartment temperature
can be set from -16 °C to -26 °C.
Hold down or keep pressing the
button until the required temperature
is indicated.
5 super" button
Switches super freezing on and off.
super" display 3 and SU" display 1
are displayed.
6 Warning signal button
Is used to switch off the
temperature warning signal and
door warning signal.
The door warning signal switches
on if the appliance door is left open for
longer than half a minute.
The temperature warning signal
switches on, AL" display 1 flashes
and the alarm" display comes on if
the freezer compartment is too warm,
i.e. the frozen food is at risk of
thawing.
Without any risk to the frozen food,
the warning signal may switch on and
the display flash:
S when the appliance is switched on
S when large quantities of fresh food
are placed in the appliance
20
S and if the freezer compartment door
is open too long.
When button 6 is pressed, the
warmest temperature" is
indicated for 5 sec. on display 1.
7 Main On/Off switch
Main switch is used to switch the
whole appliance on and off.
Note ambient
temperature and
ventilation
The climatic class can be found on the
rating plate and specifies the ambient
temperatures at which the appliance
may be operated.
Climatic class
Permitted ambient
temperature
+10 °C to 32 °C
SN
+16 °C to 32 °C
N
+18 °C to 38 °C
ST
+18 °C to 43 °C
T
Ventilation
Fig. 3
The air at the back of the appliance will
heat up. This warm air must be allowed to
freely escape, otherwise the refrigerating
machine must perform more. This raises
electricity consumption. Hence, the
air inlet and outlet apertures should never
be covered or blocked off!