Noise/Vibration Information; Declaration Of Conformity; Mounting And Operation; Battery Charging - Bosch Rotak 32 LI Originalbetriebsanleitung

OBJ_BUCH-1584-003.book Page 14 Friday, August 17, 2012 10:28 AM
14 | English
Cordless Lawnmower
Charging current
Allowable charging temperature range
Weight according to EPTA-Procedure 01/2003
Protection class
**with AL 3620 CV Professional charger
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.

Noise/Vibration Information

Measured sound values determined according to
2000/14/EC (1.60 m height, 1 m distance away).
Typically the A-weighted noise levels of the product are:
Sound pressure level 74 dB(A); sound power level 86 dB(A).
Uncertainty K =0.42 dB.
Vibration total values (triax vector sum) determined accord-
ing to EN 60335: Vibration emission value a
2
certainty K=1.5 m/s .

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with the fol-
lowing standards or standardization documents: EN 60335,
EN 50338 (battery powered product) and EN 60335 (bat-
tery charger) according to the provisions of the directives
2011/65/EU, 2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Measured sound power level 87 dB(A). Con-
formity assessment procedure according to Annex VI.
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file (2000/14/EC, 2011/65/EU) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS4,
Stowmarket, Suffolk IP14 1EY, England
Dr. Egbert Schneider Helmut Heinzelmann
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
31.05.2012

Mounting and Operation

Action
Delivery Scope
Handle Assembly
Snap together the Grassbox
Grassbox fitting/removing

Battery Charging

Inserting the Battery
F 016 L70 847 | (17.8.12)
A
°C
kg
Action
Remove Isolator Key and fit in the Storage
Position
Removing the Battery
Adjusting the Cutting Height
Starting
Stopping
2
<2.5 m/s , Un-
h
Working Advice
Blade Maintenance
Selecting accessories
Starting
For Your Safety
Warning! Switch off, remove the isolator key and the
battery before adjusting, cleaning or if cable is cut,
damaged or entangled.
The blades continue to rotate for a few seconds after
the machine is switched off.
Caution – do not touch the rotating blade.
Battery Charging
Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C and
45 °C. In this manner, a high battery service life is achieved.
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The Lithium-Ion battery can be charged at any time without
Figure
reducing its service life. Interrupting the charging procedure
does not damage the battery.
1
The "Electronic Cell Protection (ECP)" protects the lithium ion
2
battery against deep discharging. When the battery is run
3
down or discharged, the garden product is shut off by means
4
of a protective circuit: The blade no longer moves.
5
WARNING
6
been automatically switched off. The battery can be dam-
aged.
Rotak 32 LI Rotak 32 High Power
4.0
0 – 45 0 – 45
1.0
/II
Figure
7
8
9
10
10
10 – 11
12
13
Do not continue to press the On/Off
switch after the garden product has
Bosch Power Tools
4.0
1.0
/II