º Programmed Cooking - Brandt FC642 Serie Betriebsanleitung

99638345_A_ML.qxp 16/01/2007
EN 4 / USING YOUR APPLIANCE
PROGRAMMED COOKING
•
Cooking with immediate start and pro-
-
grammed duration
- Select the desired cooking mode and adjust the
1
temperature (fig.
- Press the " " touch control until the
cooking time indicator starts to flash
.
The display flashes 0:00 to indicate that you can
now adjust the setting (fig.
- Press the + or - touch controls to set the de-
sired time.
Example: 30 mins cooking time (fig.
The cooking time is automatically recorded after
a few seconds.
The cooking time display stops flashing.
The countdown of the cooking time begins imme-
diately after it has been set.
After these three steps, the oven heats up:
A series of beeps will be emitted when the oven
reaches the selected temperature.
At the end of cooking (end of programmed time),
- the oven stops,
- the cooking time indicator and 00:00 both flash
4
(fig. ).
- A series of beeps is emitted for a few minutes.
The beeps can be definitively stopped by press-
ing any touch control.
The display shows the time once again when the
function selector switch is returned to 0 (fig.5
10:54 Page 58
).
2
).
3
).
).
58
fig.1
fig.2
fig.3
fig.4
fig.5