Yamaha RX-V563 Bedienungsanleitung Seite 78

Using multi-zone configuration
Operate the following operations after activating the Zone 2
operation mode.
Operating Zone 2
Press RINPUT l / h to select the desired input
source while the ZONE2 indicator is flashing in
the front panel display.
• Select "TUNER" as the input source to use the TUNER
features in Zone 2. For details about the TUNER
operations, see "FM/AM tuning" on page 45.
• Select "V-AUX" as the input source to use iPod
features in Zone 2. For details about the iPod
operations, see "Using iPod™" on page 53.
• Select "V-AUX" as the input source to use Bluetooth
component features in Zone 2. For details about the
Bluetooth component operations, see "Using
Bluetooth™ components" on page 55.
Set Zone 2 to the standby mode
Press B ZONE 2 ON/OFF to set Zone 2 to the
standby mode.
y
Press CSYSTEM OFF to set the main zone and Zone 2 to the
standby mode simultaneously.
76
En
■ Controlling Zone 2 with the remote
control
Turning on Zone 2
While pressing and holding 4 AMP, press
G POWER.
While holding
AMP
Operating Zone 2
While pressing and holding 4 AMP, press one of
the input selector buttons ( 3 ) to select the
desired input source of Zone 2.
Setting Zone 2 to the standby mode
While pressing and holding 4 AMP, press
H STANDBY to set ZONE 2 to the standby
mode.
down
POWER