Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Recommendations - BEABA Steril Express Evolutif Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
IN
Thank you and congratulations for choosing Steril'express: your new
appliance offers many unique features.
Steril'express is a fast and efficient sterilizer completing a full cycle in just 6 minutes.

SaFETY RECOMMENDaTIONS

• Read the instructions for use carefully before using your appliance for
the first time: any use which does not conform to these instructions will
absolve Beaba from any liability.
• Do not leave the appliance within reach of children without supervision (whether
it is on or off).
• any intervention other than cleaning and normal maintenance by the customer
must be carried out by Beaba service centre.
• For your own safety, use only Beaba accessories and spare parts which are
suitable for your appliance.
OPERaTING INSTRUCTIONS
• Before you begin sterilization it is very important that all your bottles and
accessories are washed with hot soapy water, fully rinsed and then emptied.
• Clean filter under running water before every use.
• Fill the measuring cup up to the water level mark (120 ml) with fresh cold water.
• Pour into the base of the sterilizer.
• The central rod fits into the bottom tray. Insert the rod; follow the arrows in the
plastic and twist to lock firmly in place. Insert bottle holder into sterilizer.
• Place the bottles upside down on the bottom tray.
• Slide the top accessory tray over the central rod. Push the top tray down on top
of the bottles to hold firmly in place during sterilization.
• Place the accessories (teats, caps, collars etc) around the top accessory tray.
• Place the lid on the sterilizer using the location latch at the back of the unit and
lock into place by clipping down the two lockable side handles.
• ensure the power cord is connected to the sterilizer. Then connect the power
cord to your wall socket.
• Press the 'power on' switch to start the sterilization cycle.
• The lid handle will automatically change colour to show that the unit is hot (red
= hot).
• The sterilizer will switch itself off automatically at the end of the cycle after
approximately 6 minutes.
• For safety reasons, allow the appliance to cool for about 20 minutes before
repeating a sterilization procedure.
WaRNING!
Take care when opening the lid as the lid and the steam will be hot.
a notice steril express v4.indd 7
7
07/05/10 10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis