Tips For Safety; Assembling And Operating The Appliance - Silvercrest SFE 450 C1 Handbuch

• Do not touch any rotating parts.
• Turn the appliance off after use and remove the
power plug from the wall socket. Only when the
motor has come to a complete stop may the
appliance be disassembled.
NEVER use the appliance:
• If the filter/sieve, power cable or power plug are
damaged,
• In the case of malfunctions, or if it has otherwise
been damaged or dropped. Send the appliance
to Customer Services for checking and/or repair.
• The use of attachments and accessories not re-
commended or sold by the manufacturer can
cause fire, electric shocks and/or personal in-
juries.

Tips for safety:

• In cases of danger, immediately remove the power
plug from the wall socket.
• Use the appliance exclusively for the purposes
described in these operating instructions.
• Always be alert! Always pay attention to what
you are doing and act with common sense. Ne-
ver use the appliance when you are distracted
or don't feel well.
• Ensure that the appliance is correctly and com-
pletely assembled before taking it into use. The
appliance can first be taken into use when the
clamps have been closed.
• After every use of the juice extractor ensure that
the On/Off switch is moved to the position "Off"
("0"). . The motor must come to a complete stop
before you begin to disassemble the appliance.
• Remove the power plug from the wall socket
when the appliance is taken out of use, when
removing components and before cleaning it.
• Do not use the appliance outdoors.
Assembling and operating the
appliance
• Thoroughly clean all component parts as descri-
bed in the section "Cleaning and care" before
using the appliance for the first time.
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
- to the left, the container for fruit pulp and
vegetable mash
- to the right, the outlet pipe for the juice
Warning:
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice container
base , so that the three detents and the juice
u
outlet are securely engaged in the recesses.
y
2. Place the filter d
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
3. Slide the container for fruit pulp and vegetable
mash from below under the ejection shaft
s
(see fold-out page).
4. Place the housing lid
so that the loading shaft
above the cutters in the filter
5. Ensure that the housing lid
the recesses of the juice container
clasps and clip them into the notches on the
r
housing lid e .
6. Press the lower part of the claps
appliance until they engage.
- 4 -
,
o
s .
t on the appliance
on the drive shaft f and press
on the juice container
e
is seated
w
.
d
e is seated firmly in
. Lift the
t
ragainst the
r
.
y
t