Preparations; Speed Settings; Working With Kneading Hook, Whisk And Beater - Silvercrest SKV 1200 A1 Bedienungsanleitung

Preparations

1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers.
2) Clean all components as described in the sec-
tion "Cleaning and care". Ensure that all parts
are completely dry.
3) Place the appliance on a clean and level
surface and attach it firmly in place with the 5
suction cups.
4) Insert the power plug into the socket.

Speed settings

Level Use
all
1 - 2
Kneading
hook
Beater
Beater
2 - 4
Kneading
hook
4 - 6
Beater
6 - 8
Whisk
P
Blender
■ 6 │ GB │ CY
suitable for...
- Starting position for
all mixing and stirring
processes
- Adding ingredients
- Kneading and mixing
of firm dough or
firmer ingredients
- Mixing thick cake
mixture
- Mixing butter and
flour
- Mixing yeast dough
- Kneading yeast
dough
- Kneading thick cake
mixture
- Cake batter
- Whisking butter with
sugar
- Biscuit dough
- Whipped cream
- Egg white
- Mayonnaise
- Whisking butter until
fluffy
- Mixing and chopping
soft or liquid ingre-
dients
- Crushing ice
Working with kneading hook,
whisk and beater
WARNING! RISK OF INJURY!
► Never place your hands or fingers in the
mixing bowl during operation! Danger
of injury due to rotating parts!
► Do not change accessories unless the drive is
at a complete standstill! After being switched
off, the drive unit will continue to run for a
short time.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket
to prevent the appliance from being switched
back on unintentionally.
ATTENTION! PROPERTY DAMAGE!
► When working with the kneading hook
whisk or beater
lowing the appliance to cool down after
10 minutes of operation.
NOTE
► When you work with the kneading hook
whisk or beater
lid of the appliance to prevent the unwanted
leaking of ingredients.
Please proceed as follows to prepare the appli-
ance for operation with the kneading hook
whisk or beater
1) Press down the release lever
arm moves upwards automatically. If neces-
sary, move the swivel arm
position.
2) Insert the mixing bowl
the locking tabs on the mixing bowl
into the recesses in the base
of the handles must be pointing in the direction
of the rotary switch
clockwise so that it is locked and firmly held in
place.
we recommend al-
, you should use the
:
. The swivel
to the highest
in such a way that
grip
. To do this, one
. Turn the mixing bowl
SKV 1200 A1
,
,
,