Master-Section - Omnitronic CFL Serie Bedienungsanleitung

6.2 Master-section

MONITOR
With the MONITOR-control, you can adjust the output
level of the MONITOR-socket.
MIC
You can connect dynamic microphones with XLR-plug
to the MIC-socket.
MIC GAIN
With the MIC GAIN-control, you can adjust the
microphone volume.
HEADPHONES
With the HEADPHONES-control, you can adjust the
output signal of the PHONES-socket.
AUX SEND
With the AUX SEND-controls, you can adjust the
output level of the AUX SEND-sockets.
AUX RETURN
With the AUX RETURN-control, you can adjust the
input level of the AUX RETURN-sockets.
MASTER LEVEL / GROUP LEVEL DISPLAY
G1-2-3-4 to L-R
With the G1-2-3-4 to L-R-switch, you can route the
group signal to the Main Mix fader.
Group fader
With the group fader, you can adjust the signal level of
the group signal. This signal is routed to the GROUP
OUT-sockets or can be routed to the Main Mix fader by
pressing the G1-2-3-4/L-R-switch.
Main Mix fader
With the Main Mix fader, you can adjust the output
signal of the MAIN OUT-sockets.
26/28 00030025.DOC, Version 1.1